Cop y – Canon RC-V100 User Manual
Page 17
Advertising
17
En
To change the custom settings
1 Make sure the remote controller is off and not connected to any camcorder.
2 Open the cover of the SET UP switches.
3 Set the desired micro switch to the desired position.
• Micro switches A-1 to A-8 are on the left and micro switches B-1 to B-8 are on the
right.
• With a toothpick or a similar pointed tool, slide the micro switch down to set it OFF;
slide it up to set it ON.
IMPORTANT
• Make sure the remote controller is off before operating the SET UP switches.
REMOTE A
REMOTE A
COP
Y
Advertising