Canon Color imageCLASS MF9220Cdn - Manual (Page 12)

10
1 Settings Necessary to Use the Machines Functions
3
If the screen to select the country/region
appears as shown below, use [▼], [▲] or
(Scroll Wheel) to select a country/region,
then press [ OK ].
The machine restarts automatically.
Make sure that the country/region is set correctly for your
country/region.
If the country/region is not set or set incorrectly, you may
have problems in sending/receiving faxes.
The country/region setting can be changed later.
Press
(Main Menu) → <Additional Func.> → <System
Management Set.> → <Communications Settings> →
<Select Country/Region> → <Done> → Select the country/
region → Turn OFF the main power → Restart the machine.
4
The “Setup Guide” automatically appears on the
display.
<Close the front cover.> is displayed:
Make sure that the front cover is closed properly. (See “Unpack the Machine,” on
p. 3.)
<Set Toner Cartridge Again> is displayed:
Make sure that the tabs are removed from the toner cartridges and toner
cartridges are properly installed to the machine. (See “Unpack the Machine,” on
p. 3.)
●
●