Canon Color imageCLASS MF9220Cdn - Manual (Page 54)

52
3 Set Up Computers and Software
USB Connection
Before Installation
The following procedures are explained using sample screens from Windows XP Professional.
Do not connect the USB cable before installing the software. If you connect the USB cable
before installing the software and the Found New Hardware Wizard screen appears, click
[Cancel].
Log on as Administrator to install the software.
Make sure the machine is turned on before connecting the USB cable.
Click on the circled button on each screen to proceed to the next step.
A USB cable is not included with the machine.
•
•
•
•
•
•
Installation Procedure
1
Insert the UFRII LT/FAX User Software
CD-ROM.
If you want to install only the PCL
Driver (Color imageCLASS
MF9280Cdn only), proceed to step
29. For more information refer to
the Printer Driver Installation Guide
(located on the PCL User Software
CD-ROM).
If you want to install only the PS
Driver (Color imageCLASS
MF9280Cdn only), proceed to step
29. For more information refer to
the Printer Driver Installation Guide
(located on the PS User Software
CD-ROM). –
–
If you want to install the PCL/PS
driver by connecting the USB cable
(plug and play), it is necessary to
change the settings of the machine.
Press
(Main Menu) →
<Additional Func.> → <System
Management Set.>* → <PDL
Selection (PnP)> → <Done> →
<PCL5c>/<PCL6>/<PS3> depending
on the desired driver. After changing
the machine settings, install the
driver using the same procedure as
for the UFR II Printer Driver. (See
steps 6 to 12.)
* If the screen appears prompting you
to enter the System Manager ID and
System Password, enter the System
Manager ID and System Password
using
– (numeric keys), then
press (Log In/Out). For details,
see “Security,” in the e-Manual.
–
2
If the CD-ROM Setup screen is not
displayed, click [start] on the Windows
task bar → [My Computer].
Windows 2000: double-click [My
Computer] on the Windows desktop.
Windows Vista/7/Server 2003/Server
2008: click [Start] on the Windows task
bar → [Computer] ([My Computer]).
Open the CD-ROM icon, then double-
click [MInst] ([MInst.exe]).
If a language selection screen is
displayed before the CD-ROM Setup
screen, select a language and then
click [Next].