Canon Color imageCLASS MF9220Cdn - Manual (Page 19)

17
1 Settings Necessary to Use the Machines Functions
Make sure the paper stack does not exceed the load limit
mark (A).
The optional paper drawer holds approximately 500
sheets of paper (20 lb (75 g/m
2 )).
10
Press [ OK ] to proceed to the “Setup Guide.”
11
Hold the optional paper drawer with both
hands and set it back into the machine.
12
Push the paper drawer as far as it will go.
For details on loading paper in the stack bypass tray, see
“Introduction of the Machine,” in the e-Manual.
If you loaded a size and/or type of paper that is different
from what you registered in the “Setup Guide,” you need
to change the paper settings on the machine. See
“Change the Settings,” on p. 37.
–
–
–
–
13
Press [ OK ] to proceed to the “Setup Guide.”
14
Make sure the following screen is displayed
on the display, then press [ OK ] to proceed to
the “Setup Guide.”
15
Use [▼], [▲] or (Scroll Wheel) to select the
paper size you loaded, then press [ OK ].
If you use inch size paper, press the left Any key to select
<A/B Sizes> and the paper size you want to use.
16
Use [▼], [▲] or (Scroll Wheel) to select the
paper type you loaded, then press [ OK ].