Canon Color imageCLASS MF9220Cdn - Manual (Page 7)

5
1 Settings Necessary to Use the Machines Functions
8
Hold the blue tabs on the both sides of toner
cartridge, and pull it horizontally.
Do not open the drum protective shutter (A).
Do not touch the high-voltage contact (A) or the electrical
contacts (B), as this may result in damage to the printer.
9
Gently rock the toner cartridge 5 or 6 times to
evenly distribute the toner inside.
If toner is not distributed evenly, this may result in
deterioration in print quality. Make sure to carry out this
procedure properly.
–
–
10
Place the toner cartridge on a flat surface,
fold back the tab of the sealing tape (A)
located at left side of the toner cartridge.
11
Remove the sealing tape (approx. 18 7/8 inch
long) gently by hooking your finger into the
tab and pulling it out straight in the direction
of the arrow.
If toner is adhered to the removed seal, be careful not to
dirty your hands or clothing by touching it.
If your hands or clothes get dirty from touching the toner,
wash them immediately in cold water. Do not use hot
water. Doing so may cause the toner to set permanently.
12
Hook your finger into the tab and remove the
packing material (A) located at right side of
the toner cartridge.
–
–