Canon imagePROGRAF iPF760 - Manual (Page 442)

4
Insert the Holder Stopper from the left in the Roll Holder
as shown. Holding it at the position shown (b), push it
firmly in until the flange (a) of the Holder Stopper touches
the roll. Lock the Holder Stopper lever (c) by pushing it
down toward the shaft side.
Loading Rolls in the Printer Loading Rolls in the Printer
Follow these steps to load rolls in the printer.
Note
• Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If these areas are
dirty, we recommend cleaning them in advance. (See "Cleaning Inside the Top Cover.")
→P.590
1
Press the Load button.
2
Press ▲ or ▼ to select Load Roll Paper, and then press the OK button.
Note
• If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select "Yes", and then press the OK button. Remove the paper and go to the next step.
Loading Rolls in the Printer iPF760
User's Guide
Handling Paper
Handling rolls
442