Canon imagePROGRAF iPF760 - Manual (Page 82)

12
Click F Scaling and enter 120.
Note
• You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and right
edges of the paper will not be printed.
• If the original size after enlargement or reduction is smaller
than the paper size, the original is printed in the upper-left
corner. In this case, you can center originals by selecting
E Print Centered on the Layout sheet.
13
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings(Windows) →P.179 "
Resizing Originals by Entering a Scaling Value (Mac OS X) Resizing Originals by Entering a Scaling Value (Mac OS X)
This topic describes how to enlarge originals before printing by entering a scaling value, based on the following exam-
ple.
• Document: Any Type
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
• Paper type: Plain Paper
• Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
Resizing Originals by Entering a Scaling Value (Mac OS X) iPF760
User's Guide
Enhanced Printing Options
Printing enlargements or reductions
82