Canon imagePROGRAF iPF760 - Manual (Page 594)

Other Maintenance Other Maintenance
Preparing to Transfer the Printer ........................................................................................................................ 594
Updating the Firmware ....................................................................................................................................... 597
Preparing to Transfer the Printer Preparing to Transfer the Printer
To protect the internal parts in transit, always follow these steps before transferring the printer to a new location.
Refer to the Setup Guide for details on packing the printer and installing it after transfer.
Important
• Avoid tilting the printer excessively in transit. This may cause ink in the printer to leak and cause stains. If it is necessary to
tilt the printer in transit, contact your Canon dealer.
Note
• When you execute prepare to transfer, ink is drawn into the Maintenance Cartridge. Depending on the amount of free space in
the mounted Maintenance Cartridge, you may need to replace it with a new one at this time.
Note that replacement is not required if there is 60% or more free space. (See "Checking the Remaining Maintenance Cartridge
Capacity.")
→P.588
• Depending on the state of the printer, part replacement may be necessary when preparing to transfer the printer (that is, when
you execute the printer menu item to prepare for transfer).
Remove paper
1
Remove the paper.
• Rolls (See "Removing the Roll from the Printer.") →P.447
• Sheets (See "Removing Sheets.") →P.466
Access the Move Printer menu
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab ( ).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Prep.MovePrinter, and then press the OK button.
Once preparations are finished, a message on the Display Screen requests you to open the Ink Tank Cover.
Important
• If consumables must be replaced, the message "Consumables must be replaced. Call for service." is shown on
the Display Screen and preparation is not possible. If this message is displayed, press the OK button and contact
your Canon dealer for assistance.
Preparing to Transfer the Printer iPF760
User's Guide
Maintenance and Consumables
Other Maintenance
594