Depression on the leading edge is left, The size of clear film cannot be detected, Roll paper is continuously ejected – Canon imagePROGRAF iPF760 User Manual
Page 610
Depression on the leading edge is left
Depression on the leading edge is left
Cause
Corrective Action
Keeping a roll in the printer for a long time without
printing on it may leave a depression on the lead-
ing edge.
When printing quality is most important, we recommend setting TrimEdge Reload to On
or Automatic so that the paper edge is automatically cut before printing.
(See "Menu Structure.")
The size of clear film cannot be detected
The size of clear film cannot be detected
Cause
Corrective Action
The Platen is soiled with ink or other substances. Open the Top Cover and clean the entire Platen.
(See "Cleaning Inside the Top Cover.")
Roll Paper is Continuously Ejected
Roll Paper is Continuously Ejected
Cause
Corrective Action
Although sheets are se-
lected as the paper
source, a roll was ad-
vanced.
After roll ejection stops, follow these steps to reload the roll.
1.
Push the Release Lever back.
2.
Open the Roll Cover.
3.
Using both hands, rotate the Roll Holder toward the back to rewind the roll. At this time, ensure that both ends of
the roll are rewound evenly.
4.
Pull the Release Lever forward.
5.
Load the roll. At this time, be sure to press the Load button and select Load Roll Paper.
(See "Loading Rolls in the Printer.")
Depression on the leading edge is left
iPF760
Troubleshooting
Problems Regarding Paper
610