Canon imagePROGRAF iPF760 - Manual (Page 611)

Printing does not start Printing does not start
The Data lamp on the Control Panel does not light up ...................................................................................... 611
The printer does not respond even if print jobs are sent ................................................................................... 611
Ink Filling.. is displayed ...................................................................................................................................... 611
The display screen indicates Agitating .............................................................................................................. 611
The Data lamp on the Control Panel does not light up The Data lamp on the Control Panel does not light up
Cause Corrective Action
The printer is not on. Make sure the power cord is securely plugged in, all the way. Press the Power button to turn on the printer.
The target printer was not
selected when printing. In Windows, select the printer by clicking Select Printer or Printer in the printing dialog box and try printing
again.
In Mac OS X, open the dialog box of the printer driver, select the printer from the list of Printer, and try printing
again.
The print job is paused. In Windows, restart the print job as follows.
1. Select the printer icon in the Printers and Faxes (or Printers) window.
2. Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1. Click Print & Fax. (This is identified as Printer Setup Utility or Print Center in other versions of Mac OS
X.)
2.
Select the printer, and then Resume Printer (or Start Jobs) in the Printers menu to restart the print job.
The printer does not respond even if print jobs are sent The printer does not respond even if print jobs are sent
Cause Corrective Action
In the Control Panel menu, Pause Print is On. Set Pause Print to Off.
(See "Pausing Printing.")
→P.32
In the Control Panel menu, Use USB or Use Ethernet is set to Off. Set Use USB or Use Ethernet to On.
(See "Menu Settings.") →P.495
Ink Filling.. is displayed Ink Filling.. is displayed
Cause Corrective Action
The printer was forced off during opera-
tion. Wait until the system has been filled with ink. This process may take about seven and a half mi-
nutes.
The display screen indicates Agitating The display screen indicates Agitating
Cause Corrective Action
Ink agitation is in pro-
gress. Please wait until ink agitation is finished.
The time for agitation varies depending on how long the printer has been off. (Between about 30 seconds and two
minutes.)
iPF760 The Data lamp on the Control Panel does not light up
User's Guide
Troubleshooting
Printing does not start
611