Canon imagePROGRAF iPF605 - Manual (Page 135)

Handling rolls
2. Clear any jammed paper from inside the Top Cover.
After removing the paper, make sure there are no other scraps of paper in the printer.
3. Close the Top Cover.
Important
• Do not touch the Linear Scale (a) or Carriage Shaft (b).
• If paper from a roll is jammed by the Paper Feed Slot
1. Open the Roll Feed Unit Cover.
2. Remove the jammed paper from the Paper Feed Slot.
After removing the paper, make sure there are no other scraps of paper in the printer. If paper
is jammed deep in the Paper Feed Slot, (→P.122) remove the Roll Feed Unit and clear the
paper jam.
Handling Paper 121