Error messages – Canon imagePROGRAF iPF605 User Manual
Page 550
Responding to Messages
Error Messages
Error messages
Check the message and take the appropriate action.
•
Borderless printng not possible. (→P.545)
•
Cannot adjust band. (→P.548)
•
Cannot adjust printhead. (→P.548)
•
Cannot cut paper. (→P.544)
•
Cannot detect papr (→P.543)
•
Cannot feed paper. (→P.542)
•
Cannot feed paper. (→P.544)
•
Cannot print as specied. (→P.548)
•
End of paper feed. (→P.544)
•
ERROR Exxx-xxxx (x represents a letter or number) (→P.553)
•
GARO Wxxxx (x represents a number) (→P.553)
•
GL2: W0502 The parameter is out of range. (→P.552)
•
GL2: W0504 This command is not supported. (→P.552)
•
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) (→P.552)
•
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) (→P.553)
•
Ink insufcient. (→P.546)
•
Ink Level: Check (→P.547)
•
Ink tank error. (→P.547)
•
No ink left. (→P.546)
•
Insufcient paper for job (→P.540)
•
Maintenance cartridge full. (→P.551)
•
Maintenance cartridge problem. (→P.551)
•
Manual printing is selected, but a roll is loaded. (→P.542)
•
Multi-sensor error (→P.554)
•
No ink tank loaded. (→P.547)
•
No Maintenance Cartridge capacity. (→P.551)
•
No maintenance cartridge. (→P.551)
•
No Roll Feed Unit. (→P.541)
•
Paper jam. (→P.543)
•
Paper loaded askew. (→P.543)
•
Paper Mismatch (→P.538)
•
Paper size not detected. (→P.539)
•
Papr Size Mismatch (→P.539)
•
Papr Type Mismatch (→P.538)
•
Parts replacement time has passed. (→P.554)
•
PHead needs cleaning. (→P.549)
•
Prepare for maint cart replacement. (→P.551)
•
Prepare for parts replacement. (→P.554)
•
Printhead error (→P.550)
•
Problem with Printhead (→P.549)
•
Roll feed unit err (→P.541)
•
Roll printing is selected, but sheets are loaded. (→P.541)
•
Roll printing is selected. (→P.540)
•
Sheet printing is selected. (→P.542)
536 Error Message