Canon imagePROGRAF iPF605 - Manual (Page 99)

Printing procedure
Loading and Printing on Rolls
These are the basic steps for loading and printing on rolls.
Follow the steps below to switch to a new roll or a roll of a different type or width before printing.
Note
• If a sheet is loaded in the Top Paper Feed Slot, remove it before this procedure. (→P.138)
• Before printing banners or other long documents, spread a clean cloth or paper on the oor or use the
Output Stacker to prevent the printed surface from becoming dirty from the oor after printing.
• If you will wait for the ink to dry after printing and simply eject the document, you can deactivate
automatic cutting and print a cut line instead. (→P.128)
1.
Turn the printer on. (→P.27)
2. Select roll paper as the paper source. (→P.109)
Basic Printing Workow 85