Canon imagePROGRAF iPF605 - Manual (Page 237)

Printing enlargements or reductions
7. Click Roll Paper in the L Paper Source list.
8.
Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A2/A3 Roll
(420.0mm).
9.
In the A Page Size list, click the size of the original as specied in the application. In this case,
click ISO A4 or Letter (8.5"x11").
10.
Select the C Enlarged/Reduced Printing check box.
11. Click ISO A4 in the G Paper Size list.
12. Click F Scaling and enter “120.”
Note
• You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of
the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is
printed in the upper-left corner. In this case, you can center originals by selecting G Print Centered
on the Layout sheet.
13. Conrm the print settings and print as desired.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.350)
Enhanced Printing Options 223