Canon imagePROGRAF iPF605 User Manual

Page 479

Advertising
background image

Adjusting the feed amount

2.

Press the Menu button to display MAIN MENU.

3.

Press ▲ or ▼ to select Adjust Printer, and then press the ► button.

4.

Press ▲ or ▼ to select Adjust Length, and then press the ► button.

5.

Press ▲ or ▼ to select Yes, and then press the OK button.

A test pattern is printed for adjustment based on the amount of paper stretching or shrinkage.

The scale bar shows “Millimeter” in 50 mm units and “Inch” in 1 inch units.

6.

Measure the length of the adjustment pattern. Calculate the difference between the measured

length and actual length. Enter it as a percentage and press the OK button.

You can adjust the value in 0.02 0ncrements. Press ▲ to increase the value and ▼ to decrease it.

If the scale is printed shorter than actual size, set the value toward the positive side; if it is printed

longer, set the value toward the negative side.

Note

•

You can also specify the adjustment value by selecting Paper Details → Adjust Length.

Adjustments for Better Print Quality 465

Advertising