Canon VIXIA mini - Manual (Page 201)

201
Trouble?
Recording
Touching [Ü] will not start recording.
- You cannot record while the camcorder is writing previous
recordings onto the memory card (while the ACCESS indica-
tor is on or flashing). Wait until the camcorder has finished.
- The memory card is full. Delete some recordings (A 76, 81)
or initialize the memory card (A 42) to free some space.
- The folder and file numbers for movies and photos have
reached their maximum value. Set 1 > q > [File Num-
bering] to [Reset] and insert a new memory card.
The point where [Ü] or [Ñ] was touched does not match the
beginning/end of the recording.
- There is a slight interval between touching the button and
the actual start/end of recording. This is not a malfunction.
When a subject flits across in front of the lens, the image
appears slightly bent.
- This is a phenomenon typical of CMOS image sensors.
When a subject crosses very quickly in front of the cam-
corder, the image may seem slightly warped. This is not a
malfunction.
COP
Y