Canon VIXIA mini - Manual (Page 218)

218
Trouble?
List of Messages for Wi-Fi Functions
Refer also to the instruction manual of your access point and
other devices you will use.
Another user is already controlling the camcorder. Try again
later.
- This message appears on the screen of the Wi-Fi device.
Multiple Wi-Fi devices are trying to connect with the cam-
corder. Make sure only one Wi-Fi device is trying to connect
and then touch Retry.
IP address conflict
- Change the camcorder’s IP address to avoid any conflict
with devices connected to the same network. Alternatively,
change the IP address of the conflicting device.
Multiple access points detected. Try the operation again.
- There are multiple access points sending out a WPS signal
at the same time. Try the operation again later or perform
setup using the [WPS: PIN Code] or [Search for Access
Points] option (A 163).
COP
Y