Canon VIXIA mini - Manual (Page 219)

219
Trouble?
No access points found
- The access point set in the camcorder could not be found.
- Cordless phones, microwave ovens, refrigerators and other
appliances may interfere with the wireless signal. Try using
the camcorder in a location farther away from such appli-
ances.
- Make sure that you use the access point’s SSID for the
camcorder’s Wi-Fi settings (A 168).
- If the access point is using MAC address filtering, enter the
camcorder’s MAC address in the access point’s configura-
tion screen.
Unable to access configuration files
- Turn off the camcorder. After a short while, turn it on again.
If the problem persists contact a Canon Service Center.
Unable to complete WPS.
- Turn off the camcorder and access point (wireless router).
After a short while, turn them on again and try again. If the
problem persists, perform setup using the [Search for
Access Points] option (A 163).
COP
Y