Canon TX-20 Full Auto Tonometer User Manual

Page 39

Advertising
background image

4BasicOperation

39

3

Connect an RS-232C cable or LAN cable to send measurement results to an external
device.

You cannot use the RS-232C and LAN connections at the same time. Use only one.

Use a cross cable for the RS-232C cable.

Ask your sales representative or local Canon dealer to set the connections for RS-232C and

LAN.

LAN connector

RS-232C

connector

4

Connect the power cord.

Power cord

5

Insert the power plug all the way into an AC outlet.

Do not replace the paper unless the TX-20 is correctly installed in a flat location as specified.
Changing the paper while the TX-20 is not level may cause a paper jam.

L-IE-5191C_TX-20.indb 39

2013/07/18 13:10:26

Advertising