Canon TX-20 Full Auto Tonometer - Manual (Page 58)

58
5TypesofMeasurements
• Measurementbutton
1. Moves the cursor between digits in the patient No., IP address, subnet mask, default gateway,
DNS server, time and date settings. The cursor moves to the right every time it is pressed.
2. Execute the setting.
• [Input Message]:
Move to the print message input screen.
• [Adjust Brightness]: Move to the LCD brightness adjustment screen.
• [Reset]: Set the patient No. to "1".
• [Connection Check]: Check the connection with external devices.
• Alignmentoffbutton
Moves the cursor between digits in the patient No., IP address, subnet mask, default gateway, and
DNS server settings. The cursor moves to the left every time it is pressed.
Basic Operations on MENU Screen
This section explains how to set a patient No. You can set other items with the same operations.
This procedure shows how to change the patient No. from "000000" to "000012".
1
Display the MENU screen.
Press the MENU key in the screens.
2
Select the Patient tab.
Use the CHIN REST button and the measurement unit vertical movement ring to select Patient
tab.
3
Select an item.
Use the CHIN REST button to select [Patient No.] > [No.].
L-IE-5191C_TX-20.indb 58 2013/07/18 13:10:35