Changing the number of measurements – Canon TX-20 Full Auto Tonometer User Manual
Page 50
50
5TypesofMeasurements
Changing the Number of Measurements
You can set the number of measurements done in full auto-alignment mode.
One measurement (
): One automatic measurement is done.
Two measurements (
): Two automatic measurements are done.
Three measurements (
): Three automatic measurements are done.
1
Press the measurement count key.
Every time the key is pressed, the number of measurements changes.
Measurement
count key
Measurement
count
Measurement Screen
Togetahighlyreliablemeasurement
We recommend that the number of measurements be set to three in full auto-alignment mode.
We also recommend performing more than three measurements in the auto- or manual-alignment
mode to get a stable measured values.
L-IE-5191C_TX-20.indb 50
2013/07/18 13:10:31