Canon XEED WUX450 - Manual (Page 192)

Completing Computer Settings
192
5
When the operations are finished, click [Back to top] to return the initial
web screen.
Item Explanation
Projector name The name of the connected projector is displayed. ( P186 )
IP address The IP address of the connected projector is displayed. ( P191 )
Refresh Refreshes the displayed contents with the most recent information.
Power Turns projector power on or off.
Input Select an input signal and click [Apply] to change to that input
signal. (
P51 )
Aspect Select an aspect and click [Apply] to change to that aspect. ( P63 )
Image mode Select an image mode and click [Apply] to change to that image
mode. (
P68 )
Blank Switches the blank setting on or off. ( P74 )
Mute Switches the mute setting on or off. ( P75 )
Auto PC Click [Apply] to perform Auto PC adjustment. ( P55 )
Split screen Select the setting for split-screen mode and click [Apply] to switch
to split-screen projection.
Split screen control Select the control rights setting for split-screen mode and click
[Apply] to switch the side currently under control.
Information The control results and control error information are displayed at
the top of the screen.