How to use this manual, This manual, Symbols used in this manual – Canon XEED WUX450 User Manual

Page 2

Advertising
background image

2

How to Use This Manual

Thank you for purchasing a Canon projector.
The WUX450 / WX520 Multimedia Projector (hereinafter referred to as “the
projector”) is a high-performance projector that is capable of projecting a
high-resolution computer screen and high-quality digital image on a large
screen.

This Manual

This manual combines the user’s manual for WUX450/WX520 Multimedia
Projectors. The “Operation” section (

P47

) describes how to use the projector. The

“Installation and Maintenance” section (

P121

) describes initial setup and regular

maintenance. For instructions on software for projection by multiple projectors
linked in a local network, refer to the “Networked Multi-Projection (NMPJ)” section
(

P201

). Read this manual thoroughly to make the most of your projector. Installation

of the projector should be performed by a qualified technician, if possible. Contact
the Canon Customer Support Center for further information.

Symbols Used in This Manual

Meanings of the symbols used in this manual are as follows.

A precaution about operation or restriction is given here.
Indicates supplemental information to note in use.

Selecting Screen Aspect

Select the correct aspect ratio for the screen which is used.

1

Press the MENU button to display the menu window.

2

Press the [ ] / [ ] buttons to select the [Install settings] tab.

Remote control

Projector

Remote control

Projector

Symbols of Button Operations
The projector can be operated using the buttons on the remote control or on the
side of the projector. The remote control allows you to operate all functions of the
projector.
In this document, the button’s operations are shown as below.

Operation of buttons
on side of projector

Remote control button
operation

Indicate the buttons to be pressed

Advertising