Supplied accessories, Attaching the lens cap – Canon XEED WUX450 User Manual
Page 32
32
Supplied Accessories
Check that the following accessories have been supplied with the projector.
■ Attaching the Lens Cap
Align the lens cap notch with the zoom
adjustment lever as shown and attach the cap.
• Always remove the cap before
projection. Accidentally leaving
the cap on during projection may
distort the cap and damage the
projector.
• Align the notch with the zoom
adjustment lever and attach.
• Remote control
• Batteries for the remote control
(AAA size x2)
(part No.: RS-RC06)
Optional remote controls are
also available (RS-RC04, RS-
RC05). However, some buttons
are not supported with this
projector. The RS-RC05 can
also be used as a wired remote.
(
)
• Computer cable (1.8 m / 5.9')
(mini D-sub 15-pin / mini D-sub 15-pin)
• Power cord (1.8 m / 5.9')
For Continental
Europe
• User’s Manual (CD-ROM)
For the U.S.A. and
Canada
• Lens cap
• Warranty Card
• Important Information