Electrolux EQW4111BOG - Manual (Page 57)

CARE AND CLEANING
WARNING!
Switch the appliance off and let it
cool down before you clean it. Dis-
connect the appliance from the
electrical supply, before carrying
out any cleaning or maintenance
work.
WARNING!
For safety reasons, do not clean
the appliance with steam cleaners
or high-pressure cleaners.
WARNING!
Do not use abrasive cleaners, steel
wool pads or acids, they can cause
damage to the appliance.
You can remove the pan supports to easily
clean the hob. After cleaning the hob,
make sure the pan supports are correctly
positioned. Pay attention when you replace
the pan supports to prevent the glass hob
top from scratching. When you wash the
pan supports by hand, take care when you
dry them as the enamelling process occa-
sionally leaves rough edges. If necessary,
remove stubborn stains using a paste
cleaner.
Removing the dirt:
1. – Remove immediately: melting
plastic, plastic foil, and food contain-
ing sugar. Use a special glass ce-
ramic scraper. Put the scraper on
the glass ceramic surface at an
acute angle and slide the blade on
the surface.
– Stop the appliance and let it cool
down before you clean: limescale
rings, water rings, fat stains, shiny
metallic discolorations. Use a special
cleaner for glass ceramic or stainless
steel.
2. Clean the appliance with a damp cloth
and some detergent.
3. At the end rub the appliance dry
with a clean cloth.
CLEANING THE IGNITION
CANDLE
This model has a ceramic ignition candle
and a metal electrode. Keep these compo-
nents well clean to prevent difficult lighting
and check that the burner crown holes are
not blocked.
PERIODIC MAINTENANCE
Periodically speak your local Service Force
Centre to check the conditions of the gas
supply pipe and the pressure adjuster, if fit-
ted.
ENGLISH 57