Aiwa XH-A1000 - Manual (Page 11)

10
ENGLISH
SETTING POWER ECONOMIZING MODE
Setting this unit to power economizing mode reduces power
consumption as follows.
ECO ON
• When the power is turned off, all the display lights turn off, and
only the indicator on POWER lights; however, when the clock
is not set, the window turns to the demo display.
• When the power turns on due to timer recording (page 30), the
display brightness level is set to “DIMMER 3”, all button lamps
are off, and the volume is set to the minimum level (0).
• The display brightens only when operating the unit. When the
unit has not been used for 10 seconds, the brightness level
switches to the dimmer mode previously selected.
(If the display brightness level is set to “DIM-OFF”, the
brightness does not change. When the level is “DIMMER 3”,
the button lamps are also turned off.)
ECO AUTO
• In addition to the conditions of ECO ON, if CD or tape does not
play for 10 minutes or if there is no audio input from any
connected external equipment for 10 minutes when VIDEO1,
2, 3, AUX or PHONO is selected as the source, the power shuts
off. Exceptionally, the power does not shut off when the 5.1CH
is selected.
ECO OFF
The economizing mode does not work.
To change the brightness level of the display
1 Press FL DISPLAY twice so that the current mode is
displayed.
2 Within 4 seconds, turn MULTI JOG to select the dimmer mode.
The modes are displayed cyclically as below.
The mode will be automatically set after 4 seconds. 3.
DIM-OFF: The normal display.
DIMMER 1: The illumination of the display is dimmer than
usual.
DIMMER 2: The illumination of the display is dimmer than
DIMMER 1.
DIMMER 3: The illumination of the display is dimmer than
DIMMER 2. The spectrum analyzer and the
button lamps light off.
To change the spectrum analyzer display
1 Press FL DISPLAY three times so that the current mode is
displayed.
2 Within 4 seconds, turn MULTI JOG to select the spectrum
analyzer display. The modes are displayed cyclically as below.
The mode will be automatically set after 4 seconds.
MULTI JOG
ECO
CLOCK
ENTER
NORMAL REVERSE PEAK
1 Press ECO.
The current power-economizing mode status (ECO OFF/ECO
ON/ECO AUTO) will be displayed.
2 Turn MULTI JOG within 4 seconds to change the
power-economizing mode.
3 Within 4 seconds, press ENTER to set the
selected power-economizing mode.
Standby power consumption
If the power-economizing mode is OFF: 55 W
If the power-economizing mode is ON or AUTO: 1.9 W
NOTE
To view the clock when all the display lights turn off, press CLOCK
so that the time is displayed for 4 seconds.
4-CHANNEL MULTI-AMPLIFIER SYSTEM
To provide reinforcement for the ultra-low frequencies, in addition
to the Left/Right 2-channel amplifier used to reproduce mud-to-
high-range frequencies, this system incorporates a second L/R
2-channel amplifier just for reproduction of ultra-low frequencies
–making it, in effect, a 4-amplifier system. By utilizing discrete
amplifiers for mid to-high-frequencies and low frequencies, high-
quality sonic reproduction that is virtually free from distortion
can be realized.
This Multi Amplifier System, which utilizes independent circuitry
for the different frequency ranges, enables superb sonic
reproduction free from distortion.
BUILT-IN SUBWOOFER SYSTEM
The built-in subwoofer system has a separate subwoofer cavity
area that is part of the loudspeaker cabinet structure, which acts
as a sonic filter to cut distortion components. (In the Multi
Amplifier System, the ultra-low frequency signals transmitted from
their own independent amplifier are reproduced in this area.)
This separate construction gives a clear, rich definition to bass
reproduction and it can realize clear, well-defined mid-to-high
frequency signals.
And AIWA's built-in subwoofer system incorporates a subwoofer
capable of powerful, satisfying bass performance with true stereo
separation.