AT&T E5655 - Manual (Page 19)

17
Telephone Operation
Handset settings
At the feature menu you can change settings to
customize how the telephone works.
Press
MENU
, then use the ^V buttons to scroll to
the feature you want to change. As you scroll through
the menu, the top menu item is always highlighted with
a > symbol. Press
SELECT
to select the highlighted item.
Press
OFF
at any time to cancel an operation, back up
to the previous menu, or exit the menu display.
Ringer volume
At this menu you can set a ring volume level
(1-6), or turn the ringer off (0). Use the
^V buttons
to hear an example of each volume level, then press
SELECT
to select the one you prefer.
NOTE: The ringer volume level also determines the levels of ringing for
intercom calls (see page 14) and the paging tone when initiating the Handset
Locator feature (see page 21). If the handset ringer volume level is set to off
(0), that handset is silenced for all calls and paging.
Ringer volume can also be temporarily adjusted by
pressing
VOLUME
on the side of the handset during
incoming ringing.
The next call will ring normally.
Ringer tone
This feature allows you to choose one of 10 ringing
tones. Use the
^V buttons to hear an example of
each ringer tone, then press
SELECT
to select the one
you prefer.
Key tone
The handset is factory programmed to beep at each key
press. Use the
^V buttons to select
ON
or
OFF
,
then press
SELECT
to save your preference.
NOTE: If you select OFF, you will not hear a beep when you press
keys.
Highlighted
menu item
> DIRECTORY
CALL LOG
RINGER VOLUME
RINGER TONE
1
KEY TONE
ON
91-000373-030-000_E5655_R4.qxd 11/1/2005 10:04 AM Page 17