Power outage message, Hot surface indicator will – LG LRE3091SW User Manual
Page 10
10
S U R FAC E C O N T RO L S C O O K I N G
POWER OUTAGE MESSAGE
If your oven was set for a timed oven operation and a
power outage occurred, the clock and all programmed
functions must be reset.
The time of day will flash in the display when there
has been a power outage.
Press the Clear/Off pad. Reset the clock with the
correct time of day.
HOT SURFACE INDICATOR WILL
• Come on when the unit is hot to touch after.
• Come on during self-cleaning cycle.
• Stay on even after the unit is turned off.
• Glow until the unit has cooled down to
approximately 150°F.
LOCATIONS OF THE RADIANT SURFACE ELEMENTS AND
CONTROLS
The radiant surface elements are located on the
cooktop as below.
TIMER
DELAY
TIMED
BAKE BROIL
WARM
CLEAN LOCKED
Single
Left Front
Element
Single
Left Rear
Element
Single
Right Rear
Element
Dual
Right Front
Dual Element