Displaying disc information on - screen, Initial settings – LG LHT799 User Manual

Page 12

background image


Displaying Disc Information
On - screen

You can display various information about the disc
loaded on-screen.

1. Press DISPLAY to show various playback

The displayed items differ depending on the disc
type or playing status.

2. You can select an item by pressing v / V and

change or select the setting by pressing b / B.

Title (Track) – Current title (or track) number/

total number of titles (or tracks).

Chapter – Current chapter number/total number
of chapters.
Time – Elapsed playing time.
Audio – Selected audio language or channel.
Subtitle – Selected subtitle.
Angle – Selected angle/total number of angles.
Sound – Selected sound mode.

If any button is not pressed for a few seconds, the on-
screen display disappears.

Initial Settings

By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see the pages 12 to 14.

To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.

To go to the next level:
Press B on the Remote Control.

To go back to the previous level:
Press b on the Remote Control.


1. Press SETUP. The Setup menu appears.

2. Use v / V to select the desired option then press

B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).

3. Use v / V to select the second desired option and

then press B to move to the third level.

4. Use v / V to select the desired setting then press

ENTER to confirm your selection. Some items
require additional steps.

5. Press SETUP or PLAY to exit the Setup menu.



Select a language for the Setup menu and then on-
screen display.

Disc Audio / Subtitle / Menu

Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.

Original – Refers to the original language in which
the disc was recorded.

Other – To select another language, press
numeric buttons and then ENTER to enter the
corresponding 4-digit number according to the
language code list on the page 29. If you enter the
wrong language code, press CLEAR.


TV Aspect

4:3 – Select when a standard 4:3 TV is connected.

16:9 – Select when a 16:9 wide TV is connected.

Display Mode

The display Mode setting works only when the TV
Aspect mode is set to “4:3”.

Letterbox – Displays a wide picture with bands on
the upper and lower portions of the screen.

Panscan – Automatically displays the wide picture
on the entire screen and cuts off the portions that
do not fit.