Xts/xts pro, Displaying disc information on - screen, Initial settings – LG LHT764 User Manual
Page 19: Installation and setup
Each time you press XTS pro the setting changes in
the following order.
The unique sound quality of the LG Technology
creates the optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.
When playing a movie with weak bass relative to
the general music, it forces sound to the woofer.
In the mode of 2 CH BYPASS, It creates the high
display effect by playing the sound source via the
rear speakers same as the front speakers.
The XTS mode is temporarily disabled when changing
from 2.1 CH to 5.1 CH and it is enabled when changing it
to 2.1 CH.
Displaying Disc Information
On - screen
You can display various information about the disc
1. Press DISPLAY to show various playback
Thedisplayed items differ depending on the disc
type or playing status.
2. You can select an item by pressing
change or select the setting by pressing
Title (Track) – Current title (or track) number/
total number of titles (or tracks).
Chapter – Current chapter number/total number
Time – Elapsed playing time.
Audio – Selected audio language or channel.
Subtitle – Selected subtitle.
Angle – Selected angle/total number of angles.
Sound – Selected sound mode.
If any button is not pressed for a few seconds, the on-
screen display disappears.
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see the pages 19 to 22.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
on the Remote Control.
To go back to the previous level:
on the Remote Control.
1. Press SETUP. The Setup menu appears.
to select the desired option then press
to move to the second level. The screen shows
the current setting for the selected item, as well as
to select the second desired option and
to move to the third level.
to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.
Installation and Setup