Viewing a jpeg file, Operation – LG LHT764 User Manual
Viewing a JPEG file
This unit can play discs with JPEG files.
Before playing JPEG recordings, read the notes on
JPEG Recordings on the right.
1. Insert a disc and close the tray.
The PHOTO menu appears on the TV screen.
to select a folder, and then press
ENTER. A list of files in the folder appears.
If you are in a file list and want to return to the
previous Folder list, use the
buttons on the
remote to highlight
and press ENTER.
3. If you want to view a particular file, press
highlight a file and press ENTER or PLAY. While
viewing a file, you can press STOP to move to the
previous menu (JPEG menu).
When viewing a JPEG file, the resolution is changed 480p
if the resolution set to 1080i. You can change the
resolution for 720p or 480p.
There are four Slide Speed options
> (Slow), >> (Normal), >>> (Fast) and II (off).
to highlight the Speed. Then, use
select the option you want to use and then press ENTER.
If you set Speed option to Off, the slide is not active.
v V b B
to highlight the
(Slide Show) then
press ENTER. (You can not change resolution)
1. Press PAUSE/STEP during the slide show.
The unit will now go into the PAUSE mode.
2. To return to the slide show, press PLAY or press
Moving to another File
Press SKIP (
) once during viewing a
picture to advance to the next or previous file.
Rotating the picture
during showing a picture to rotate
the picture clockwise or counter-clockwise.
JPEG Folder 1
JPEG Folder 2
JPEG Folder 3
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
JPEG disc compatibility with this player is
limited as follows:
• Depending upon the size and the number of
JPEG files, it could take a long time for the unit to
read the disc’s contents. If you don’t see an on-
screen display after several minutes, some of the
files may be too large — reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
2048 pixels and burn another disc.
• The total number of files and folders on the disc
should be less than 999.
• Some discs may not operate due to a different
recording format or the condition of disc.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
• If the files have “.jpe” or “.jpeg” extensions,
please rename them as “.jpg” file.
• File names without “.jpg” extension will not be
able to be read by this unit. Even though the files
are shown as JPEG image files in Windows