AT&T Telephone Adapter User Manual

Page 27

Advertising
background image

25

I may have an

integrated modem/

home router. How

can I find out?

If you have a single device that plugs directly into your
cable/DSL jack and that you can connect multiple
computers into (allowing each to access the Internet),
you have an integrated modem router.

I have an integrated

modem/ home router.

I don’t know which

section to use in this

guide.

While integrated modem/home routers are not explicitly
supported, you can typically get the service to work if you put
the integrated modem/router in bridge mode.
Check with your cable/DSL provider to see if it supports
putting integrated modem/routers in bridge mode, and if so,
how to put your device into bridge mode.

I have a USB DSL

modem.

DSL modems with only a USB interface are not supported.

I have a satellite

broadband Internet

connection.

Satellite broadband connections are not supported.

I have a private IP

address.

While private IP addresses are not explicitly supported, you
can typically get the device to work if you put your router into
what is known as bridge mode.
Check with your router’s owner’s manual to see if it supports
bridge mode and how to do so.

I can’t get this to

work with my

company’s VPN.

AT&T CallVantage

SM

Service supports most VPN clients.

Check the settings on your VPN Client to verify that “keepalive”
messages are disabled. Also, select “allow VPN to pass
through NAT”, if this option is available. You may have to dis-
able (uncheck) “negotiate UDP encapsulation with VPN tunnel
server”, if this option is available. You may also have to contact
your network administrator to understand what other settings
may need to be modified for your setup.

My data service is

lost every once in a

while, but I still have

a dial tone.
I am using a home

router and have to

reboot everything to

get the data to work

again.

If you are using a home router, make sure your device has the
most up-to-date software available from the manufacturer.
Software updates are readily available from the manufacturer’s
Web site. Check their site for your model, and compare the
most recent version they are offering against the version your
device is running. If they are not the same, follow the upgrade
instructions on the Web site or in your router’s manual.

PROBLEM

RESOLUTION

PROBLEM

RESOLUTION

PROBLEM

RESOLUTION

PROBLEM

RESOLUTION

Advertising