HP Matrix Operating Environment Software - Manual (Page 45)

•
Unable to add or edit HP P6000 Storage Replication Group
Possible causes include:
◦ Unable to obtain Storage Replication Group information from Command View servers to
validate the Storage Replication Group information provided by the user.
•
Unable to add or edit HP P9000 Storage Replication Group
Possible causes include:
◦ The Storage Replication Group is not configured to be managed by the RAID manager
instances.
◦ The RAID manager service is not running on the local Storage Management Server.
◦ The parameters entered for the Storage Replication Group (local array, remote array,
serial number, and replication mode) do not match the Storage Replication Group
information on the disk array.
•
Unable to add or modify HP 3PAR Storage Management Server
Possible causes include:
◦ The password file for the HP 3PAR storage system is missing from the /storage/3par/
conf
directory where Matrix recovery management is installed.
◦ The password for the HP 3PAR storage system has been changed since the password file
was created.
•
Unable to add or edit HP 3PAR Storage Replication Group
Possible causes include:
◦ The Storage Replication Group is not configured to be managed by HP 3PAR remote
copy.
◦ The following parameters entered for the Storage Replication Group cannot be validated
with the HP 3PAR storage system configuration:
– volume group name on local HP 3PAR storage system
– volume group name on remote HP 3PAR storage system
– local array remote copy group name
– remote array remote copy group name
– local HP 3PAR storage system serial number
– remote HP 3PAR storage system serial number
– replication mode
•
Matrix recovery management logical server configuration inconsistent with Matrix OE logical
server management logical server configuration
Possible causes include:
◦ The HP Logical Server Automation service was not running when Recovery Groups were
configured in Matrix recovery management.
◦ The logical server was being actively managed when the Matrix recovery management
configuration was invoked (logical server modification, logical server activation, or logical
server deactivation was in progress).
Configuration troubleshooting 45