ADTRAN 1200214L1 - Manual (Page 57)

61200214L1-1 IQ Probe User Manual 37
Chapter 5. Configuration Overview
Chapter 5
Configuration Overview
LOCAL AND REMOTE CONFIGURATION
The IQ Probe can be configured locally, or communications can
be established so that a local IQ Probe can configure a remote IQ
Probe using a VT 100 interface. See the chapter Operation for
information on selecting Local or Remote operation.
The Configuration menu consists of submenus relating to
specific interfaces or functions of the IQ Probe requiring setup:
DTE Port
DCE Port
Dial Backup (if ESP DBU card is installed)
Control (front panel only)
System
The terminal configuration menu is shown in Figure 5-1.
For detailed information on configuration, see the chapters DTE
Port Configuration, Configuring the DCE Port, Configuring Dial
Backup Options, and System Configuration.