ADTRAN 1200214L1 - Manual (Page 74)

50 IQ Probe User Manual 61200214L1-1
Chapter 7. Configuring the DCE Port
Figure 7-1
Terminal DCE Port Configuration Menu
Physical Layer Options (PHYS LYR OPTS)
The following sections describe the physical layer options
available for the DCE port:
Interface Type
Select the DCE interface type. The choices are X.21, V.35, EIA-
530, and EIA-232.
Serial Bit Rate <Kbps> (RATE <Kbps>)
Set the Serial Bit Rate to match the speed of the attached DSU/
CSU. The IQ Probe uses this information for statistical analysis.
If this field is not set correctly, it could cause some statistics to be
inaccurate.