HP StoreEver Ultrium Tape Drives - Manual (Page 15)

The cable supplied with the tape drive is suitable for connecting to a mini-SAS (SFF-8086/8087)
connector on a dedicated HBA or on the server's SAS controller. If your server has a SAS 4i connector
(SFF-8484), a suitable cable is available, but must be purchased separately.
NOTE:
Power for the Ultrium 3000 tape drive is supplied through the SAS cable. For all earlier models of
tape drive, a separate power cable is required, see
https://www.hp.com/go/connect .
4. Unused second branch on supplied cable 1. Mini-SAS connector to server
5. Tie wrap 2. SAS connector to tape drive
6. Cover on unused SAS connector 3. Power connector to server's power supply
Figure 2 SAS with power cable supplied with Ultrium 3000 internal tape drives
.
3. Unused second branch on supplied cable 1. Mini-SAS connector to server
4. Tie wrap 2. SAS connector to tape drive
5. Cover on unused SAS connector
Figure 3 SAS without power cable supplied with Ultrium 1760, 920 and 448 internal tape drives
.
Ultrium Half-Height SAS Tape Drives 15