HP StoreEver Ultrium Tape Drives User Manual
Page 25
4. Unused second branch on supplied cable
1. Mini-SAS connector to server
5. Tie wrap
2. SAS connector to tape drive
6. Cover on unused SAS connector
3. Power connector to server's power supply
Figure 9 SAS cable supplied with LTO-5 Ultrium 3000 tape drives
.
The SAS connector on the cable supplied with all other HP StorageWorks Ultrium tape drives does
not provide power. There is a separate power connector on the rear of the tape drive.
3. Unused second branch on supplied cable
1. Mini-SAS connector to server
4. Tie wrap
2. SAS connector to tape drive
5. Cover on unused SAS connector
Figure 10 SAS cable supplied with all other Ultrium tape drives
.
NOTE:
The cable supplied with the tape drive is suitable for connecting to a mini-SAS (SFF-8086/8087)
connector on a dedicated HBA or on the server's SAS controller. If your server has a SAS 4i connector
(SFF-8484), a suitable cable is available, but must be purchased separately, see
.
Ultrium Half-Height SAS Tape Drives
25