HP NonStop G-Series - Manual (Page 234)

NonStop dba/m Database Manager for NonStop SQL/MP User’s Guide 522632-005 16-7
Adding Partitions
To add partitions to an index, click on Index Partitions in the Main
window, then click on Add. The Add Partition window will be displayed,
as shown in Figure 16-4.
Figure 16-4. Add Partition Window.
Assign the Number of Partitions
Enter the number of partitions you want in the index in the Number of
Partitions field.
Note: The number you enter should be one less than the total number of
partitions, because the primary partition is automatically assigned when the
index is created.
Assign Volumes
To choose the volumes where you want the partitions to be located
1. Click on Volumes to choose the volumes where your partitions are
going to be located. The Select Volume window is displayed, as shown
in Figure 16-5.