HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem User Manual
Page 142
Virtual Connect server profiles 142
Item
Description
Netmask
IP network mask used by the iSCSI initiator. This value is in dotted decimal format.
Gateway
Default IP route used by the iSCSI initiator. This value is in dotted decimal format.
Authentication Method
CHAP (one-way)
One-way Challenge-Handshake Authentication Protocol. The authentication protocol
for authenticating initiators and targets. CHAP is one-way authentication; the iSCSI
target authenticates the initiator. The initiators ‘username’ and ‘secret’ are required.
CHAPM (two-way)
Two-way CHAP. The initiator and target perform two-way authentication. The initiators
‘username’ and ‘secret’ and targets ‘username’ and ‘secret’ are required for
authentication.
Username
The user name for authentication when the authentication type is CHAP or CHAPM. The
maximum length is 223 characters.
Secret
The secret password for CHAP or CHAPM authentication. It can be a string or a long
hex value (starting with ‘0x’). The value must be at least 12 bytes (or 24 hex digits) and
at most 16 bytes (or 32 hex digits).
Mutual Username
Mutual username for CHAPM authentication
Mutual Secret
The secret password for CHAPM authentication
To use DHCP when configuring the iSCSI boot configuration, select the Use DHCP checkbox.
Selecting this option requires a DHCP server to be set up with iSCSI extensions to provide boot parameters
to servers. The DHCP Vendor ID is offered by the initiator to the DHCP server to retrieve the iSCSI boot
configured data. For more information, see the documentation that ships with the DHCP server and "DHCP
)."