HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 32)

Virtual Connect domains 32
Trap Category Severity MIB
Output utilization below low-water
mark² VC-Enet Port Threshold NORMAL VCM-MIB
Input errors above high-water mark² VC-Enet Port Threshold WARNING VCM-MIB
Input errors below low-water mark² VC-Enet Port Threshold NORMAL VCM-MIB
Output errors above high-water mark² VC-Enet Port Threshold WARNING VCM-MIB
Output errors below low-water mark² VC-Enet Port Threshold NORMAL VCM-MIB
¹ Only supported by the HP VC 8Gb 24-Port FC module
² The VC Module MIB has the capability to send traps when certain bandwidth and throughput utilization thresholds are
reached. The threshold values are not configurable in this release and are defined as follows:
— Port utilization high water mark 95%
— Port utilization low water mark 75%
— Errors high water mark 5%
— Errors low water mark 1%
For more information, see the description field in the source code for individual MIBs.
The VC-FC module generates connUnitPortStatusChange traps based on changes to the connUnitPortStatus
element of the FA-MIB. The following table shows the mapping of connUnitPortStatusChange trap severities
to the VC Domain MIB's trap severity definitions.
connUnitPortStatus value Severity
unknown INFO
unused INFO
ready
NORMAL
warning WARNING
failure CRITICAL
nonparticipating INFO
initializing INFO
bypass INFO
ols MAJOR
other INFO
VC Module MIB traps
The following table lists traps in the VC Module MIB.
Trap name Trap data Description
vcModRoleChange moduleRole The VCM role of the module has changed.
vcModInputUtilizationUp port identification The input line utilization on a port has exceeded its
high-water mark for longer than 30 seconds. port is the
index of the affected port in ifTable.
vcModInputUtilizationDown port identification
The input line utilization on a port has dropped below its
low-water mark for longer than 30 seconds. port is the
index of the affected port in ifTable.
vcModOutputUtilizationUp port identification The output line utilization on a port has exceeded its
high-water mark for longer than 30 seconds. port is the
index of the affected port in ifTable.
vcModOutputUtilizationDown port identification
The output line utilization on a port has dropped below its
low-water mark for longer than 30 seconds. port is the
index of the affected port in ifTable.