HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 59)

Virtual Connect users and roles 59
To test an LDAP configuration:
1. Be sure that LDAP group settings are configured.
2. Be sure that any LDAP certificates are installed.
3. Access the LDAP Server Settings (LDAP Server) screen (on page 57 ).
4. Enter the LDAP configuration information.
5. Click Test. The LDAP Configuration Test screen appears.
6. Enter a valid user name and password.
7. Click Test.
The status window displays any problems encountered during the test. When testing is complete, click Close.