HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 170)

Virtual Connect server profiles 170
2
Start with modules in Bays
3–6, create a profile, then
edit the profile and add
connections.
Port Connected to
1 Bay 3
2 Bay 4
3 Bay 5
4 Bay 6
— —
Bay 3 Bay 4
Bay 5 Bay 6
— —
Port Connected to
1 Bay 3
2 Bay 4
3 Bay 5
4 Bay 6
5 Bay 3
6 Bay 4
7 Bay 5
8 Bay 6
Add connection, 4 times
3
Start with modules in Bays
3 and 4, create a profile,
hotplug modules into Bays
5 and 6, then edit the
profile and add
connections.
Port Connected to
1 Bay 3
2 Bay 4
— —
Bay 3 Bay 4
Bay 5 Bay 6
—
—
Port Connected to
1 Bay 3
2 Bay 4
3 Bay 5
4 Bay 6
Add connection, 2 times
4
Start with modules in Bays
3 and 4, create a profile
(add 2 connections),
hotplug modules into Bays
5 and 6, then edit the
profile.
Port Connected to
1 Bay 3
2 Bay 4
3 Bay 3
4 Bay 4
— —
Bay 3 Bay 4
Bay 5 Bay 6
—
—
Add connection is
disallowed because the
current FC module
configurations do not
match the existing
connections in the
profile.
This profile is not useful
after the hotplug. To
resolve this issue, delete
connections 3 and 4,
save the profile, and then
scenario 3 applies.
5 Start with modules in Bays
3–6, create a profile,
hotplug modules into Bays
7 and 8, then edit the
profile and add
connections.
Port Connected to
1 Bay 3
2 Bay 4
3 Bay 5
4 Bay 6
— —
Bay 3 Bay 4
Bay 5 Bay 6
Bay 7 Bay 8
Port Connected to
1 Bay 3
2 Bay 4
3 Bay 5
4 Bay 6
5 Bay 7
6 Bay 8
Add connection, 2 times
6
Start with modules in Bays
3–6, create a profile (add
4 connections), hotplug
modules into Bays 7 and
8, then edit the profile.
Port Connected to
1 Bay 3
2 Bay 4
3 Bay 5
4 Bay 6
5 Bay 3
6 Bay 4
7 Bay 5
8 Bay 6
— —
Bay 3 Bay 4
Bay 5 Bay 6
Bay 7 Bay 8
Add connection is
disallowed because the
current FC module
configurations do not
match the existing
connections in the
profile.
This profile is not useful
after the hotplug. To
resolve this issue, delete
connections 5–8, save
the profile, and then
scenario 5 applies.