HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 38)

Virtual Connect domains 38
Field name Description
The read community string must always be set when SNMP is enabled. The
maximum length is 24 characters.
SNMP Trap Destinations SNMP trap destination table
Destination
User-designated name for the trap destination. The Destination name must be
unique.
IP Address
IPv4 address for the trap destination. DNS name is not supported.
Community String The Community String acts like a password for a given trap destination. The
trap-receiving application can use the community string to filter the incoming traps.
Default: public
Format Format of the new trap (SNMPv1)
Action Perform edit and delete operations
The following table describes the available actions in the SNMP Configuration screen. Clicking another link
in the pull-down menu or left navigation tree causes current edits that have not been applied to be lost.
Task Action
Add an SNMP trap destination
("
Adding an SNMP trap
destination " on page 36 )
Click Add below the destination table, or right-click on the header row of
the destination table, and then select Add Destination.
Edit an SNMP trap destination Click Edit in the Action column, or right-click on the trap destination row,
and then select Edit Destination.
Delete an SNMP trap destination Click Delete in the Action column, or right-click on the trap destination
row, and then select Delete Destination.
Save changes Click Apply.
SMI-S overview
The SMI-S was created by SNIA to standardize storage management solutions. SMI-S replaces multiple
disparate managed object models, protocols, and transports with a single object-oriented model for each
type of component in a storage network. SMI-S enables management applications (such as HP SIM) to
support storage devices from multiple vendors quickly and reliably because they are no longer proprietary.
SMI-S detects and manages storage elements by type, not by vendor.
The ability to enable or disable SMI-S is not available on the HP VC 8Gb 24-Port FC module.
You must have storage or domain administrative privileges to configure SMI-S capabilities.
Viewing the system log
Use the following screens to view and configure domain system log information:
• System Log (System Log) screen (on page 39 )
o View logged information events within VCM
• System Log (Configuration) screen (on page 41 )
o View remote log destination settings
o Set remove log destination settings