HP 3PAR Recovery Manager Software for VMware vSphere Licenses - Manual (Page 67)

NOTE: Retention time restrictions are:
◦ You must have an HP 3PAR Virtual Lock license to use the -retain option.
◦ The minimum retention period is 1 hour; the maximum is 43,800 hours / 1,825 days (5
years).
◦ The default retention time is 336 hours (14 days).
◦ The retention time cannot exceed the value of the system's virtual volume maximum
retention time.
◦ You can set a retention time regardless of whether the policy is numeric- or
expiration-based.
◦ The retention time cannot be longer than the expiration time (if the policy is
expiration-based).
◦ The retention time cannot be removed or reduced after it is set.
For more information on setting retention times for individual virtual copies, see the RMExch
create
and RMExch setvc commands.
•
-f - Optional - When used with the -retain option, does not request confirmation for the
retention time modification.
•
-domain <DomainName> - Optional. Specifies the domain to which the Exchange server
or storage group belongs.
If this option is not specified, Recovery Manager for Exchange uses the local domain.
NOTE: Use quotes ("") where spaces are included.
Examples
The following command will display current number of virtual copies allowed for any storage group
under the specified server.
RMExch policy -s bottlenosed -g storageGroup
The following command will change the maximum virtual copies allowed for any storage group
under bottlenosed to 10 and remove the oldest virtual copy when the maximum number is
reached.
RMExch policy -s bottlenosed -g "first storage group" -i 10 -r
The following command sets the expiration time to 25 hours for virtual copies in storage group
sg2
:
RMExch policy -mdb sg2 -exp 25h
Recovery Manager Commands 67