HP 3PAR Recovery Manager Software for VMware vSphere Licenses - Manual (Page 26)

5 Configuring Backup Software
Overview
HP 3PAR Recovery Manager can be used with either Symantec NetBackup or HP Data Protector
to back up and restore the virtual copies created by Recovery Manager. Keep in mind:
•
If you are using backup software in the backup environment, you will need to install a backup
master or client on the backup server.
•
There should be two master servers containing your backup software for CCR configurations
that span two sites (and two HP 3PAR Storage Systems).
•
If you are using a multiple-domain configuration, you must use Symantec NetBackup software.
NOTE: For information about the supported versions of Symantec NetBackup and HP Data
Protector, see the latest HP 3PAR InForm OS Configuration Matrix. To obtain a copy of this
documentation, go to
http://www.hp.com/go/3par/ , navigate to your product page, click Support
for your product, and then click Manuals.
Before You Begin
Ensure that you have set up a storage unit for storing virtual copy backups. For more information,
see the documentation for the backup software you are using.
Configuring Symantec NetBackup
To set up your Symantec NetBackup software, see the Symantec NetBackup documentation.
To configure Symantec NetBackup to function with Recovery Manager for Exchange, set the
following parameters during the configuration process:
Setting Backup Policy Parameter
MS-Windows-NT Policy type
Select the machine on which the Recovery Manager Backup
Server component is installed. Clients
User backup Type of backup
Activate all the time slots: Starting times for backups
•
Modify Day: Mon
• Start Time: 12:00:00AM
•
End Day: Sun
• End Time: 12:00:00AM
•
Duration (days): 7
26 Configuring Backup Software