HP 3PAR Recovery Manager Software for VMware vSphere Licenses - Manual (Page 55)

RMExch config
SYNTAX
To change/query the timeout value for NetBackup initialization process detection:
RMExch config -h <WindowsHost> -bktmout [-sec <seconds>]
To change/query the monitoring interval for Remote Copy progress on target server:
RMExch config -h <WindowsHost> -rcintvl [-min <Minutes>]
DESCRIPTION
The RMExch config command will display or change the timeout value for NetBackup initialization
process detection for backup operation and the monitoring interval for remote copy progress on
target server.
PARAMETERS
The following options are supported:
•
-h <WindowsHost> - Specify the Recovery Manager installed Windows host to change or
query settings. If the host is in a different domain, specify the FQDN.
•
-bktmout - Setup or inquiry for Backup process timeout value to confirm that NetBackup has
received the backup request. Valid values are 0 to 86400 seconds. Default is 30 seconds.
•
-min <Minutes> - This is optional. Specifies the number of minutes.
•
-sec <Seconds> - This is optional. Specifies the number of seconds. This option can only
be used if the -bktmout option is also specified.
•
-rcintvl - Setup or inquiry for Remote Copy process monitoring interval. Valid values are
3 to 15 minutes. Default is 3 minutes.
Example
The following command will change Remote Copy monitoring interval to 10 minutes.
RMExch config -h Grampus -rcintvl -min 10
Recovery Manager Commands 55