Change error correction and fax speed, Set the fax-error-correction mode, Change the fax speed – HP LaserJet Pro M1536dnf MFP SERIES User Manual
Page 169
Include the first page of each fax on the fax confirmation, fax error, and last call reports
1.
On the control panel, press the
Fax Menu
button.
2.
Use the arrow buttons to select the Fax
Reports menu, and then press the
OK
button.
3.
Use the arrow buttons to select the Include 1st
page menu, and then press the
OK
button.
4.
Use the arrow buttons to select the On option,
and then press the
OK
button to confirm the
selection.
Change error correction and fax speed
Set the fax-error-correction mode
Usually, the product monitors the signals on the telephone line while it is sending or receiving a fax. If
the product detects an error during the transmission and the error-correction setting is On, the product
can request that the portion of the fax be resent. The factory-set default for error correction is On.
You should turn off error correction only if you are having trouble sending or receiving a fax, and you
are willing to accept the errors in the transmission. Turning off the setting might be useful when you are
trying to send a fax overseas or receive one from overseas, or if you are using a satellite telephone
connection.
1.
On the control panel, press the Setup button.
2.
Use the arrow buttons to select the Service menu, and then press the
OK
button.
3.
Use the arrow buttons to select the Fax Service menu, and then press the
OK
button.
4.
Use the arrow buttons to select the Error Correction menu, and then press the
OK
button.
5.
Use the arrow buttons to select the On or Off option, and then press the
OK
button to save the
selection.
Change the fax speed
The fax-speed setting is the modem protocol that the product uses to send faxes. It is the worldwide
standard for full-duplex modems that send and receive data across telephone lines at up to 33,600 bits
per second (bps). The factory-set default for the fax-speed setting is Fast(V.34).
You should change the setting only if you are having trouble sending a fax to or receiving a fax from a
particular device. Decreasing the fax speed might be useful when you are trying to send a fax overseas,
or receive one from overseas, or if you are using a satellite telephone connection.
1.
On the control panel, press the Setup button.
2.
Use the arrow buttons to select the Fax Setup menu, and then press the
OK
button.
ENWW
Solve fax problems 155