HP Designjet 2500.3500cp Printer series - Manual (Page 121)

Working with Ink Systems
Removing and Storing Partially Used Ink Systems
4-25
Storing the Ink System in the HP DesignJet CP Ink System
Storage Container
Additional HP DesignJet CP Ink System Storage Containers can be purchased
separately through your Hewlett-Packard dealer. Refer to page 13-18, Ordering
Accessories for more information.
CAUTION The sequence in which the printhead cleaner and printhead are inserted into
the HP DesignJet CP Ink System Storage Container is very important to
prevent printhead damage. Always follow the sequence in the procedure given
below.
1 To remove the partially used Ink System components from the printer refer to page
4-11, Removing and Replacing Ink Systems.
2 Have the Ink System components ready for storing in the HP DesignJet CP Ink
System Storage Container.
3 Lower the two cover lock-arms and remove the top cover from the storage
container.
C6240007