HP Color LaserJet CM3530 Multifunction Printer series - Manual (Page 89)

E-mail Settings
The product requires a Simple Mail Transfer Protocol (SMTP) gateway server to forward e-mail
messages to a destination.
NOTE: If the SMTP gateway is not responding or has not been configured, the following message
appears on the screen:
0.0.0.0 is not responding or is not a valid SMTP Gateway Server.
Use the E-mail Settings screen to configure SMTP settings, set the maximum e-mail attachment size,
and set the default e-mail address for the product. You can also set a default subject for all e-mail
messages that the product sends. The following illustration and table describe how to use this screen.
Figure 4-4 E-mail Settings screen
1
2
3
4
5
6
7
8
9 10
11
12
13
14
15 16
Table 4-4 E-mail Settings
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and menus For more information, see Navigating through the HP Embedded Web Server
on page 4 .
2 Help Click to open a help file that contains information about the screens on the
Digital Sending tab.
3 Send e-mail Send e-mail messages to the SMTP Gateway server directly from the product.
4 Device's SMTP Gateway Type the TCP/IP address or the host name of the SMTP Gateway server that
will manage the e-mail requests from the device. If you do not know the TCP/
IP address or the host name of the SMTP Gateway, click the Find Gateways
button to search the network for a suitable SMTP Gateway server.
ENWW E-mail Settings 77