HP Color LaserJet CM3530 Multifunction Printer series - Manual (Page 98)

Addressing Settings
NOTE: The LDAP protocol is typically only used in corporate e-mail environments. If you are using an
ISP for e-mail services, HP recommends that you use the E-mail Address Book function.
In order for the product to send scanned documents, you must provide one or more destination address.
The product addressing feature simplifies this process by accessing the network LDAP server.
Use the Addressing Settings screen to set features that allow the product to get addresses directly
from the database of a Lightweight Directory Access Protocol (LDAP) server instead of from a replicated
LDAP Address Book. Using the LDAP Address Book directly guarantees that the latest addresses are
used. A message appears on the screen if the LDAP server settings are invalid or cannot be detected
automatically. The following illustration and table describe how to use this screen.
Figure 4-8 Addressing Settings screen
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
Table 4-6 Addressing Settings
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and menus For more information, see Navigating through the HP Embedded Web Server
on page 4 .
2 Help Click to open a help file that contains information about the screens on the
Digital Sending tab.
3 Allow Device to directly access
an LDAP Address Book Select this check box to provide the device direct access to an LDAP Address
Book.
86 Chapter 4 Setting the digital sending options ENWW